Optoma Technology Home Theatre Projector manuel dutilisation Image Mode

￿ser ￿ontrols

Image Mode

For easy, care-free operation, HD81-LV comes with preset image modes. Once the front-end is correctly fine tuned in SETUP and IMAGE, user can simply switch among the pre-set modes to have different image effects.

1)Use “”, “” arrow keys to select the “Image Mode” adjustment item, press “Enter” key or “” key to enter this adjustment item.

2)Use “”, “” arrow keys to select the preferred image mode. There are 5 preset modes: Film, TV, Graphics, PC and one-user modes; each mode is fine tuned for specific desired image performances. Please refer to the following description:

Film: Simulate a Movie Theater image performance, darker with great picture depth, more a “film-like” experience, suitable for a complete dark room environment.

TV: Normal mode is brighter, and the image is more “TV-like”.

English

Graphics: This mode is for image source.

PC: This mode is for PC or computer source.

User: This Mode allow memorize user’s gamma curve in this image mode.

3)User can select and setup their favorite setting on the “User” mode and an adjust submenu that shows as the following.

4)Use “”and “” arrow keys to select a different Input level or select the “reset” function; user may adjust output value by using “”, “” in each input level.

5)A complete gray level bar on the top of screen is shown while adjusting level; it may help user to see different effects with different value to decide a suitable value.

6)If user wants to set gamma curve as “linear”, use “”or “” arrow keys to move “reset” and press “enter”, then select “Yes” on confirmation notice so that the gamma curve is back as “linear”. Once user selects “reset” and gamma curve as “linear”, the previous setup values are all removed.

39