Optoma Technology Home Theatre Projector Lamp, Film Mode 48Hz, Auto Power Off mins, Settings copy

￿ser ￿ontrols

“Film Mode (48Hz)” function is only supported under HDMI mode.

Lamp

This function can adjust setup about lamp.

Lamp Hours: Displays the cumulative lamp operating time.

Lamp Reminding: Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp.

Lamp Reset: Reset the lamp life hour after replacing the lamp.

Film Mode (48Hz)

On: Enables Film Mode (48hz) function. Use this mode if the source device is capable of outputting 24fps.

Off: Disables Film Mode (48hz).

Auto Power Off (mins)

Sets the interval of power-off of the system, if there is no signal input. (In minutes)

Anamorphic Lens

From

I/O

Timing

None: No Anamorphic Lens in front of the HD81-LV.

Fixed: You have a fixed Anamorphic Lens in front of the HD81-LV.

Movable: You have a powered Anamorphic Lens that support 12V Trigger to control.

When Anamorphic Lens set as “Fixed” or “Movable”, the default format will become “Auto235” that replace original format “Native”. (See page 35)

Settings copy

This function allow user copy image setting that user adjust from one to another.

Group 1	Group 2		Group 3		Group 4		Group 5
HDMI	HDMI	HD 1/	HD 3/	D-Sub HD 3/		D-Sub	S 1/	Video 1/
1/2/3	1/2/3	HD 2	HD 4		HD 4		S 2/	Video 2/
		(RCA)	(BNC)		(BNC)		S 3	Video 3
480i		480i	480i	480i			NTSC	NTSC
480p		480p	480p	480p			PAL	PAL
576i		576i	576i	576i
576p		576p	576p	576p
720p		720p	720p	720p
1080i/p		1080i	1080i	1080i
	PC				PC	PC

(*) HD mean Component; PC signal only can copy to PC signal

Reset

46

Returns the settings for all menus to factory default values.