Optoma Technology TX6353D, TW6353D manual English, User Controls

User Controls

Below is an example on how to do a quick network setup

Step 1: Assign an ip address of 192.168.0.100 and subnet mask of 255.255.255.0.

Step 2: Select apply and press enter to save the changes and then exit the menu.

Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks

,click Change settings of this connection.

Step 4: On the General tab, under

This connection uses the following items, click Internet Protocol (TCP/IP), and then click “Properties.”

Step 5: Click Use the following IP address, and type in as below:

1)IP address: 192.168.0.101

2)Subnet mask: 255.255.255.0

3)Default gateway:192.168.0.254

Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...”

Step 7: The Local Area Network (LAN) Setting dialog box appears, In the Proxy Server area, cancel the

Use a proxy server for your LAN check box., then click “OK” button twice.

Step 8: Connect a cat5 cross-over network cable between the projector and the computer.

Step 9: Open your IE and type in the IP address of 192.168.0.100 in the URL then press “Enter” key.

43English