Oracle Audio Technologies B31679-01 manual Verifying installation, Click System DSN

Verifying installation

To verify that TimesTen has been properly installed, check that the driver files are available and that the services are running:

1.Check that the TimesTen 7.0 Start menu shortcut has been added to the Windows Desktop Start > Programs menu.

2.On the Windows Desktop, choose Start > Settings > Control Panel > Administrative Tools > Data Sources (ODBC). This opens the ODBC Data Source Administrator.

3.Click Drivers. Check to see that the correct drivers are installed. You should see the TimesTen Data Manager driver. If you installed TimesTen Client, you should see the TimesTen Client 7.0 driver. Click OK.

4.On the Windows Desktop, choose Start > Settings > Control Panel > Administrative Tools > Services and check that the TimesTen Data Manager 7.0 service has the word “Started” in the Status field. At this time, you can also set Recovery options to attempt to restart the service after a failure.

These steps verify that the system has been installed properly.

Verifying TimesTen Client and Server installation

To verify that the Client and Server have been properly installed:

1.On the Windows Desktop, choose Start > Settings > Control Panel > Administrative Tools > Data Sources (ODBC).

This opens the ODBC Data Source Administrator.

2.Click System DSN.

3.Select the RunDataCStt70 or ShmRunDataCStt70 sample data source and click Configure.

Note: The RunDataCStt70 DSN is used for client applications that use TCP/IP communications with the TimesTen Server. The ShmRunDataCStt70 DSN is used for client applications that use shared memory to communicate with a TimesTen Server on the same machine.

This opens the TimesTen Client Data Source Setup dialog.

4.Click Test TimesTen Server Connection to attempt a connection to the server.

42Oracle TimesTen In-Memory Database Installation Guide