Oracle Audio Technologies B31679-01 To destroy a permanent data store Temporary=0, use ttDestroy

Step Upgrade System Active System

6.Use ttMigrate to back up the data store upgrade. If the data store is very large, this step could take a significant amount of time. If sufficient disk space is free on the /backup file system, the following ttMigrate command can be used:

ttMigrate -c DSN=upgrade /backup/upgrade.dat

7.If the ttMigrate command is successful, destroy the data store upgrade.

To destroy a permanent data store (Temporary=0), use ttDestroy:

ttDestroy upgrade

To destroy a temporary data store (Temporary=1), use ttAdmin:

ttAdmin -ramUnload upgrade

Note: You can delay destroying the old data store upgrade until the migration into the new TimesTen version is successful. However, the replication agent on both data stores must remain stopped and active-to- upgrade replication on the data store active must be remain in the pause state.

Restart the replication agent on the data store active:

ttAdmin -wait -repStart active

8.	Install the new release of TimesTen.	Resume replication from active to
		upgrade by setting the replication
		state to start:

ttRepAdmin -connStr DSN=active -receiver -name upgrade -start start

Data Store Upgrades 111