Oracle Audio Technologies SG-XPCIE2FC-ATCA-Z manual 1HBA Features and Specifications

TABLE 1-1HBA Features and Specifications

Feature	Description
AMC connector	B+
PCI signaling environment	PCI Express x4 (4 active lanes)
PCI transfer rate (maximum)	PCI Express Generation One (2.5 Gbits/sec) x4
Number of FC buses	Two
Number of devices supported	126 devices per FC loop; 510 devices in Fabric mode
FC bus type (external)	Fiber-optic media, short-wave, multi-mode fiber
	(400-M5- SN-S)
FC transfer rate	400 MBps per port maximum, half-duplex
	800 MBps per port maximum, full-duplex
RAM	1.5 MB, parity protected, per port
BIOS ROM	One 4-MB flash ROM, field-programmable
NVRAM	One 2-KB EEPROM, field-programmable
External connectors	Two Small-Form Factor (SFF) multimode optic with LC-
	style connectors
Maximum FC cable length	1 Gbps: 500 meters using 50/125 ∝m core fiber
	300 meters using 62.5/125 ∝m core fiber
	2 Gbps: 300 meters using 50/125 ∝m core fiber
	150 meters using 62.5/125 ∝m core fiber
	4 Gbps: 150 meters using 50/125 ∝m core fiber
	70 meters using 62.5/125 ∝m core fiber
LED indicators	Two LEDs per channel (yellow and green) on the front
	panel as status indicators. Three AMC LEDs: one blue
	LED for hot-swap, one red LED for out-of-service, and
	one green LED for in-service.
Form Factor	AdvancedMC, single wide

2 Sun StorageTek ATCA 4Gb FC Dual Port HBA Installation Guide • April 2010