Component Function and Identification
|
| B |
|
|
| S | A |
|
|
|
|
|
| |
|
| D |
|
|
|
| R |
|
|
|
| E |
|
|
|
| F |
|
|
| M | G |
| C |
| H |
|
| |
|
|
|
| |
| K | L |
|
|
|
|
|
| |
|
| N | R |
|
|
|
|
| |
|
| P |
|
|
| J |
|
|
|
Fig. 1 | 232918, 232916, 232919 and 232914 |
| 9661A | |
|
|
|
| |
A | Motor (Under shield shown) | DC motor, permanent magnet, totally enclosed, fan cooled |
| |
B | Pressure Adjusting Knob | Controls fluid outlet pressure |
|
|
C | ON/OFF Switch | Power switch that controls VAC main power to sprayer |
| |
D | Drive Assembly | Transfers power from DC motor to the displacement pump |
| |
E | Fluid Filter | Filter of fluid between source and spray gun |
| |
F | Fluid Outlet | Main hose to spray gun is connected here |
| |
G | Pail Hanger | Container for fluid to be sprayed may be hung here |
| |
H | Displacement Pump | Transfers fluid to be sprayed from source through spray gun | ||
J | 50 ft (15 m) Main Hose | 1/4 in. ID, grounded, nylon hose with spring guards on both ends | ||
K | RAC IV Tip Guard | |||
L | Contractor Gun | High pressure spray gun with gun safety latch |
| |
M | RAC IV Switch Tip | RAC switch tip uses high pressure fluid to remove clogs from spray tip | ||
|
| without removing tip from spray gun |
|
|
N | 3 ft (0.9 m) Hose | 3/16 in. ID, grounded, nylon hose used between 50 ft hose and spray gun | ||
|
| to allow more flexibility when spraying |
|
|
P | Pressure Drain Valve | Relieves fluid outlet pressure when open; diverts fluid to drain line | ||
R | Pressure Control | Controls motor speed to maintain fluid outlet pressure at displacement | ||
|
| pump outlet. Works with pressure adjusting knob. |
| |
S | Spray Gun Safety Latch | Inhibits accidental triggering of spray gun |
| |
2309067
