Oreck 700 Orbiter, Importante, 550 / 600 / SÉRIE, Guide D’Utilisation, Usa Canada Commercial

E N G L I S H

Troubleshooting Guide

WARNING: Unplug cord from electrical outlet before servicing.

PROBLEM	POSSIBLE SOURCE	AREAS TO CHECK
Floor Machine	Not plugged in	Be sure cleaner is
will not run	properly.	firmly plugged
		into wall outlet.
	No electricity in	Check electrical
	wall outlet.	source–fuse or
		circuit breaker.
	Blown fuse/	Replace fuse/
	tripped breaker	Reset breaker
	Motor circuit	Turn switch off
	breaker has	and unplug
	tripped.	cleaner. Check
		motor shaft for
		binding.
		ORB 600:
		Allow 30 minutes
		for motor to cool
		and system to
		reset.
		ORB 550/700:
		Are equipped
		with a red reset
		button on the top
		of the motor
		housing (back left
		side of chrome
		grill). Press the
		reset button.
Floor Machine	Brush or pad	Place it properly.
bounces	holder not	(See operating
	properly in place.	instructions.)
	Using brush on dry	Apply necessary
	surface without	shampoo dry or
	dry shampoo or	wet.
	wet shampoo.
	Using black	Use white
	carpet brush on	terrycloth bonnet
	berber or low-	instead.
	pile carpet.

Whenever calling, please be sure to have your model and serial number from data plate.

ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER.

CALL CUSTOMER SERVICE HOT LINE

USA: 1-800-989-3535

CANADA: 1-888-676-7325

COMMERCIAL: 1-800-242-1378

F R A N Ç A I SS I M P L Y A M A Z I N G ®

GUIDE D’UTILISATION

F R A N Ç A I S

ORBITER®

MACHINE MULTI-SOLS

550 / 600 / 700

SÉRIE

•IMPORTANTE•

CONSERVEZ CE FASCICULEComprend: Avertissements de sécurité GarantieMode d’emploi Guide de dépannage Accessoires

12