Oreck DS1700HY Important Safety Instructions, For Commercial Use, E N G L I S H, page, appliance

Models: DS1700HY

1 16
Download 16 pages 61.79 Kb
Page 3
Image 3
E N G L I S H

E N G L I S H

BEFORE OPERATING CLEANER, READ ALL INSTRUCTIONS IN THIS MANUAL CAREFULLY.

Table of Contents

 

 

Maintenance and Customer Service, Grounding Instructions,

 

 

Motor Protection System, Important Safety Instructions

page

2

Accessories, Warranty, Troubleshooting Guide

page

3

Parts List, Assembly, Operating Instructions,

 

 

General Information

page

4

General Information cont., To Replace Filter Dust Bag,

 

 

How to Replace a Worn Belt, To Adjust or Replace Brush,

 

 

Stuffing or Blockage

page

5

Français Guide D’utilisation

page

6

Español Guia Del Usuario

page

11

Maintenance and Customer Service

 

 

Your Oreck vacuum cleaner is a product of precise engineering. The motor bearings are permanently lubricated and should not be oiled. If you require additional information or have problems with your Oreck appliance, you may call ORECK Commercial Customer Service at:

USA & Canada: 1-800-989-4244

Please specify the model number and serial/code number which can be found on the data plate on the back of the vacuum.

Save your sales or purchase slip. Should your Oreck appliance require warranty service in the U.S.A., present this slip to the Authorized Service Center as your proof of purchase date or, in Canada, call customer service.

Grounding Instructions

This appliance must be grounded. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electric shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an electrical outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify plug provided with appliance.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is grounded. If not, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120-

Grounding Pin

volt circuit. It has a grounding plug similar

to the example shown. Make sure the appliance is connected to an outlet with the same configuration as the plug. No adapter should be used with this

appliance.

Grounded Outlet

 

Motor Protection System

Fan blockage may cause the fan motor to shut off to avoid over-heating. If this happens, turn power off and unplug the vacuum cleaner. Remove top cover and brush roll cover (See: To Adjust or Replace Brush).

Remove any blockage inside fan housing. Reassemble and discontinue use for approximately 30 min. The motor will have cooled and the cleaner will be ready to use.

Note: The vacuum cleaner must remain unplugged for 30 minutes for motor to cool and system to reset.

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS VACUUM CLEANER

WARNING

To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.

Do not operate the unit while in the upright and locked position.

Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

Do not allow to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual. Use only manufacturer’s recommended attachments.

Only use Oreck extension cord.

Only use 16 AWG SJT extension cords.

Do not use an extension cord longer than 100’ feet. (30.5m)

Do not modify or use a non-grounded extension cord.

Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.

Connect to a properly grounded outlet only. See: Grounding Instructions.

Do not use with damaged cord or plug.

If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or call customer service at:

USA & Canada 1-800-989-4244

Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

Do not run vacuum over cord.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not handle plug or vacuum cleaner with wet hands.

Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.

Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

Do not use to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without filter bag assembly in place.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Do not use to pick up flammable or combustible liquids, such as gasoline or lighter fluid, or use in areas where they may be present.

Do not use appliance in an enclosed space where flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some mothproofing substances, or in an area where flammable dust is present.

Do not pick up toxic material such as chlorine bleach, drain cleaner, gasoline, etc. with this appliance.

Do not operate vacuum cleaner without plenum cover in place.

SAVE THESE INSTRUCTIONS

For Commercial Use

2

Page 3
Image 3
Oreck DS1700HY Important Safety Instructions, For Commercial Use, E N G L I S H, Table of Contents, Grounding Instructions