Toshiba FS-1450-1 SERIES owner manual Address No Description of Programming Contents

EO1-11097

NOTES: 1) The “Address Nos” designation at the top after “4 [X]” can be skipped if not necessary. If entered, the designated Address (es) will automatically be accessed after the PLU Code designation.

2)A maximum of 1100 PLUs are programmable (varies depending on the allocation of the RAM). The “[PLU]” key here indicates the key labeled simply as “PLU” but not any PLU Preset-code Keys.

3)When the Address No. is sequential from the preceding address (if the Address Designation feature has not been used), the Address No. and the following [ST] can be omitted.

4)The programming contents of each address are further described in the PLU TABLE PROGRAMMING CONTENTS below.

		PLU TABLE PROGRAMMING CONTENTS
Address No.		Description of Programming Contents
1	Linked Department Code
	Enter the 2-digit code of the depertment to which the PLU is linked. When
	the PLU is newly programmed, this entry is compulsory (an error will result
	if this entry is skipped.)
			[#]
	1 to 60
2	Linked Department Code
	Enter a maximum of 16 reguler-sized or 8 double-sized characters. See
	the CHARACTER ENTRIES at the beginning of this chapter. End with
	[ST].
	When no name is programmed for a PLU, the following will be the auto-
	program name for printing:
		PLUxxxxxx (PLU Code Max. 6 digits)
3	Preset Price
	• For a preset PLU (preset-price PLU, enter a maximum of 6-digit price,
	and depress [#].
		1 to 999999 (result: $0.01 to $9999.99)
	When the option “Preset Point for one decimal digit allowed” is selected,
	the decimal digit can be entered after entering a maximum of 5 interger
	digits and the [ • ]key
		1 to 99999 (result: $0.01 to $999.99)
			or
		0.1 to 99999.9 (result: $0.001 to $999.999)
	• A zero-price ($0.00) may be preset by entering 0 in the above operation.
	• When no numerics are entered and the [#] key is simply depressed, the
	PLU will be an open PLU (open-price PLU).
			--Continued on next page --

– 40 –