Toshiba FS-1450 Function Keys Amount Limit Read, Negative Amount KEY Amount Limit Read

EO1-11097

2.2OTHER OPERATIONS REQUIRING MANAGER INTER- VENTIONS

Amount Limit Release

Amount Limits may be programmed on Departments/PLUs, Tender Medias, [DOLL DISC], [VND CPN], [STR CPN], [BTL RTN]. These limits are programmed to check an excessively high or low amount entry by cashier’s mistake at the earliest stage. Guide your cashiers as in the following procedure:

(1)During sale entries by the cashier, an error occurs.

(2)The cashier clears the error by the [C] key. The cashier confirms the amount and operate the item again.

(3)If the same error occurs again, the cashier attempts to enter the amount using the [LC OPEN] or [OPEN] key.

(4)If the operation results in an error again, the Amount Limit cannot be solved by the [LC OPEN] or [OPEN] key.

(5)The cashier calls for Manager Intervention.

The procedure thereafter is the same as Steps 2) to 7) for the ITEMS PROGRAMMED TO REQUIRE MANAGER INTERVENTIONS. (Section 2.1)

■In need of information of Amount Limits, see the following:

1)Individual Department High and Low Amount Limits (each PLU is restricted by the Amount Limits of its linked department): Ask your TOSHIBA TEC representative.

2)Departments Common High and Low Amount Limits, and High Amount Limits of Tender Media keys:

Chapter 7: VERIFICATION OF PROGRAMMED DATA

•FUNCTION KEYS AMOUNT LIMIT READ

3)High Amount Limits for [DOLL DISC], [VND CPN], [STR CPN], and [BTL RTN] keys:

Chapter 7: VERIFICATION OF PROGRAMMED DATA

•NEGATIVE AMOUNT KEY AMOUNT LIMIT READ

4)For setting or changing the current Amount Limits, see the following:

Chapter 6: PROGRAMMING OPERATIONS

•AMOUNT LIMIT SETTING FOR FUNCTION KEYS (Submode 8)

•NEGATIVE AMOUNT KEY AMOUNT LIMIT SETTING OR CHANGING (Submode 35)

- 4 -