EO1-11097

CHARACTER ENTRIES

As already stated, there are two method of operations for character settings for names or messages: CHARACTER CODE ENTRY Method and DIRECT CHARACTER ENTRY Method.

CHARACTER CODE ENTRY Method

This method is to set a character by entering a Character Code and depressing the [#] key. This method is allowed only on the ECR keyboard.

DIRECT CHARACTER ENTRY Method

This method is to set a character by directly depressing the Character Key on any of the following keyboard:

Flat Keyboard with “Setting Mode Key Layout” sheet.

PK-2 Keyboard (PLU Keyboard; hardware option)

By using those character keys, the characters are directly entered. In this manual sample operations are attached to most of the programming operations. And at name or message programming portions, characters are entered by the DIRECT CHARACTER ENTRY method.

On the following pages, Character Code Tables under the CHARACTER CODE ENTRY Method and two different keyboards under the DIRECT CHARACTER ENTRY Method are shown. These pages are to be referred to, every time the “Character Entries” sequence is contained in various program- ming operations in this manual.

Read through these pages at least once first, so that you may know the appropriate method of character entries using the ECR keyboard and/or option keyboards.

– 28 –

Page 102
Image 102
Toshiba FS-1450-1 SERIES owner manual Character Entries