Toshiba FS-1450-1 SERIES Recall Entry, Validation Print, Total, Recall Item Corr, Validate

EO1-11097

RECALL ENTRY

This operation recalls a order table.

OPERATION

Order No. [RECALL] Sale finalization

Additional order entry

[TOTAL]

Sale finalization

NOTE: Recall Entry can be canceled.

To end the entry, follow the procedure described below.

[RECALL]

[ITEM CORR]	[AT/TL] (or other media)
[ALL VOID]	[ITEM CORR]

VALIDATION PRINT

OPERATION
After entering the required	Insert a validation slip into	[VALIDATE]
item through a transaction	the validation slot. make
key or media key. (NOTE 1)	sure that the "SLIP" lamp is
	steadily lit. (NOTE 2)

NOTES: 1. If the "SLIP" lamp flickers during registra- tions, it indicates that the last item just entered is programmed to require valida- tion print. In this case, no other opera- tions can follow until the validation print of the item is first executed.

2. Because printing occurs on the front side of the slip, please be certain to insert the slip into the validation with the printing side frontward.

3. No other operations can follow until the validation slip once printed is withdrawn.

4.The following are programmable selec- tions relating to validation:

(1) PRINT FORMAT	Validation Slot
	Validation Slip

a)Date Print/Non-print

b)Consecutive No. Print/Non-print

c)Cashier No. Print/Non-print

(2)MULTI- or SINGLE-VALIDATION (Number of times of validation print allowed for the same item)

(3)VALIDATION COMPULSORY status on Media Keys and other transaction keys.

5.When the sale-finalizing media key is programmed with Validation Compulsory status and the key is used with over-tendering, the drawer will open on the compulsory validation print.

6.When the sale-finalizing media key is programmed with Validation Compulsory status and the key is used with equal-tendering or used as Total key, the drawer will open even if the status "Not Open" is programmed on the key.

–55 –