EN
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
• Main unit | 3 x | (AA) 1.5V batteries |
• Remote unit | 2 x | (AAA) 1.5V batteries |
Insert batteries before first use, matching the polarity (+ and
NOTE Do not use rechargeable batteries.
shows when batteries are low.
NOTE It is recommended that you use alkaline batteries with this product for longer performance.
| UNIT |
| LOCATION | |
| Main | Indoor Temperature / | ||
|
| Humidity Area | ||
|
|
|
|
|
| Remote | Outdoor Temperature / | ||
|
| Humidity Area | ||
|
|
|
|
|
Installing the batteries: |
|
|
| |
|
|
|
|
|
|
|
|
|
|
TABLE STAND OR WALL MOUNT
Use the stand on the back of the main unit / remote sensor, or mount it on a wall with a nail.
To attach the main unit stand:
To use the main unit wall mount:
To use the remote sensor stand or wall mount:
ACCESS FRONT BUTTON PANEL
The front button panel is located inside the right portion of the main unit. Slide it right to access the buttons.
CHANGE SETTINGS
To change, time, calendar and language settings:
1.Press and hold MODE for 2 seconds to enter setting mode.
2.Press 
or 
to change settings. (To reach the setting you want quickly, press and hold 
or 
.)
3.Press MODE to confirm.
REMOTE SENSOR (THGR122NX)
This product is shipped with a THGR122NX Thermo / Hygro Sensor that collects Temperature and Humidity data. Data can be collected from up to 3 sensors. Additional sensors sold separately.
SETUP SENSOR
1.Open the remote sensor battery compartment with a small Phillips screwdriver.
2.Insert the batteries, matching the polarity (+ and
4
