NOTE The transmission range may vary and is subject to the receiving range of the main unit.
You may need to experiment with various locations to get the best results.
SENSOR DATA TRANSMISSION
Data is sent from the sensor(s) every 60 Seconds. The reception icon shown in the Temperature / Humidity Area indicates the status.
ICON | DESCRIPTION | ||||
|
|
|
|
| Main unit is searching |
|
|
|
|
| for sensors. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| At least 1 channel has |
|
|
|
|
| been found. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Sensor 1 is sending |
|
|
|
|
| data. (The number |
|
|
|
|
| shows which sensor is |
|
|
|
|
| selected.) |
|
| ||||
The selected sensor | |||||
Humidity Area | cannot be found. | ||||
|
|
|
|
| Search for the sensor |
|
|
|
|
| or check batteries. |
|
|
|
|
|
|
13
SEARCH FOR SENSOR
To search for a Thermo / Hygro sensor, press SELECT to navigate to the Temperature / Humidity Area. 
will show next to the Area. Then, simultaneously press and hold MEMORY and CHANNEL for 2 seconds.
To search for the UV sensor, press SELECT to navigate to the UVI / Barometer Area. 
will show next to the Area. Then, press and hold MEMORY and CHANNEL for 2 seconds. (The UV sensor is an optional item.)
NOTE If the sensor is still not found, check the batteries.
CLOCK AND CALENDAR
This product tracks the time and date based on US atomic clock signals from the RTGR328NA remote sensor, or manual settings that you enter.
EN
BAR988HGA English R5 | 13 | 9/18/04, 3:00 AM |
