UV data is shown in the same area as the Barometer. Press SELECT to navigate to the Barometer Area, then press MODE to display the UV icon 
and data.
NOTE Refer to the UVR138A User Manual for more information and see below to learn about the new additional UV features.
NEW ADDITIONAL UV FEATURES
UV EXPOSURE TIME COUNTDOWN
To set the exposure time countdown you need set to the Skin Type and Sun Protection Factor (SPF) as follows:
1.Press SELECT to navigate to the Barometer Area, then press MODE to select the UV display.
2.Press CHANNEL to select user
3.Press and hold MODE for 2 seconds to enter the Skin Type Setting Mode of the selected user.
4.Press UP or DOWN to choose 1 of the 4 skin type settings. Then press MODE to confirm and enter the SPF Set Up Mode.
5.Press UP or DOWN to increase or decrease the SPF value. Then press MODE to confirm and enter the UV Exposure Time Countdown Setting Mode.
6.Press UP or DOWN to enable or disable countdown. Press MODE to exit the UV Exposure Time Countdown Mode and start the exposure time countdown. The remaining user UV exposure time
will display and the 
will flash.
7.When the countdown has reached "0", an alarm will sound for 2 minutes. Press any button to turn the alarm off. The 
icon will flash for 2 minutes even if you have stopped the alarm sound.
MAXIMUM / MINIMUM MEMORY FOR UVI
To view the maximum and minimum memory for UVI:
1.Press SELECT to navigate to the Barometer Area.
2.Press MODE to select the UV display.
3.Press MEMORY to show maximum, minimum and current UVI readings.
4.Press and hold MEMORY for 2 seconds to clear the UVI memory.
19
EN
BAR988HGA English R5 | 19 | 9/18/04, 3:00 AM |
