Oregon Scientific BAR988HGA View Temperature And Humidity Area, Select Sensor Channel

EN

NOTE The UV sensor must be activated before you try and set the additional features. Please refer to the UVR138A User Manual for more information.

TEMPERATURE AND HUMIDITY

The weather station can display the following information from any of the 5 remote sensors:

•Current, minimum, and maximum temperatures and relative humidity percentages.

•Comfort level indicator and trend line (rising, falling, or steady).

Data is collected and displayed approximately every 60 seconds.

VIEW TEMPERATURE AND HUMIDITY AREA

Press SELECT to navigate to the Temperature and Humidity Areas.

Temperature data is given at the top; Humidity is below.

20

SELECT MEASUREMENT UNIT

Slide the °C / °F switch (inside the clock battery compartment), to the setting you want.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1-5.

The house icon shows the selected remote sensor.

•To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds.

•To end auto-scan, press CHANNEL or MEMORY with the Temperature / Humidity Area selected.

NOTE If you select a sensor that collects only temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

•Press MEMORY repeatedly to view current, maximum and minimum records for the selected sensor.

•To clear the records, press and hold MEMORY for 2 seconds. A beep will sound to confirm that the memory has been cleared.

BAR988HGA English R5 20 9/18/04, 3:00 AM