Oregon Scientific RMR612HGA user manual Reset System, Safety And Care, Minimum / Maximum Records

EN

To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensor's data will be displayed for 3 seconds. To end auto-scan, press MEM or CHANNEL.

NOTE If you use a sensor that collects only temperature data, humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records for the selected sensor. To clear the records, press and hold MEM for 2 seconds.

A beep will sound to confirm that the memory has been cleared.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown near the Temperature and Humidity readings.

Trend	Rising	Steady	Falling
ICON

10

RESET SYSTEM

The RESET buttons are located in the battery compartments for the main unit and remote sensors. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or radio-controlled clock).

NOTE When you press RESET, all settings will return to default value, and you will lose all stored information.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol- free mild detergent. Avoid dropping the product or placing it in a high-traffic location.

RMR612HGA lab test R2 10 1/17/04, 4:58 PM