Oregon Scientific RMR612HGA user manual Data Transmission, Icon Description, Search for Sensor

For best results:

•Insert the batteries and select the channel and temperature unit before you mount the sensor.

•Place the sensor out of direct sunlight and moisture.

•Do not place the sensor more than 30 meters (98 feet) from the main (indoor) unit.

•Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture.

•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.

•Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission.

You may need to experiment with various locations to get the best results.

7

DATA TRANSMISSION

Data is sent from the sensor(s) every 40 seconds. The reception icon shown in the Temperature and Humidity Areas shows the status.

ICON	DESCRIPTION
	Main unit is searching for
	sensors.
	At least 1 channel has
	been found.
	Channel 1 is selected (the
	number will change
	depending on the sensor
	you select).
--- shows in Temp/	The selected sensor cannot
Humidity Areas	be found. Search for the
	sensor or check batteries.

SEARCH FOR SENSOR

To search for a sensor, press and hold MEM and CHANNEL for 2 seconds.

NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location.

NOTE Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure. This is normal and does not affect general product performance. The reception will resume once the interference ends.

EN

RMR612HGA lab test R2 7 1/17/04, 4:58 PM