ALARM
This product is equipped with a
VIEW ALARM SETTINGS
Press 
. The Alarm Time and On/Off status will show in the Clock Area.
SET ALARM
1.Press 
.
2.Press and hold 
again for 2 seconds. The Alarm settings will blink.
3.Select the hour and minute. Press UP or DOWN to change settings. Press 
to confirm.
ACTIVATE ALARM
Press 
to activate or deactivate the Alarm. 
shows in the Clock Area when the Alarm is activated.
SNOOZE ALARM
Press SNOOZE to silence the Alarm for 8 minutes.
If no button is pressed, the Alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes.
TEMPERATURE AND HUMIDITY
This product can display the following temperature and humidity information:
•Current, minimum and maximum readings
•Trend line
Data is collected by the remote sensors and displayed every 40 seconds.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The switch is located in the battery compartment. The setting for the main unit overrides the remote sensor setting.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 3.
The house icon shows the selected sensor.
Kinetic- |
|
|
|
| |
wave |
|
|
|
| |
Icon |
|
|
|
| |
|
|
|
|
| |
Display | Indoor | Remote | Remote | Remote | |
Display | Display | Display | |||
Display | |||||
| |||||
| Channel 1 | Channel 2 | Channel 3 | ||
|
| ||||
|
|
|
|
|
9
EN
RMR612HGA lab test R2 | 9 | 1/17/04, 4:58 PM |
