Oregon Scientific WR602 Channels About Radio Channels, Channel Corresponding Radio Frequency

EN
	Carter	030011	Baker, MT	162.550	WXK57	300	N
	Cascade	030013	Great Falls	162.550	WXJ43	300
			MT
	Chouteau	030015	Miles Hill,	162.500	WWG84	300
			MT

NOTE Many counties have been subdivided into as many as 9 smaller subsections. The numbers 1-9 in the far left column of the SAME code identifies specific subsections of a county. If a county has not been subdivided, the first digit of the SAME code will be 0.

CHANNELS

ABOUT RADIO CHANNELS

The NWR radio channels work in the same way as a regular radio channel. All of the NWR transmission stations operate on 1 of 7 frequencies.

CHANNEL CORRESPONDING RADIO FREQUENCY

1162.400 MHz

2162.425 MHz

3	162.450 MHz
4	162.475 MHz
5	162.500 MHz
6	162.525 MHz
7	162.550 MHz

AAuto – the unit will tune to the strongest RF signal available

8

The unit labels each frequency as a channel (1-7 or Auto). Once the radio frequency for a region has been selected the unit will receive voice and code information from that station.

The channel number in use can be viewed on the top left-hand corner of the LCD.

SETTING THE RADIO CHANNEL

To change the radio channel, navigate to “Set Channel” setting mode and select the desired Channel, as shown in the Changing Settings section.

LOCATIONS

SETTING THE LOCATION

You need to set the location so that you can receive weather and environmental information for an area that is relevant to you.

You can choose the location by either the state and county name, or FIPS code. Up to 9 locations (1-9) can be stored.

NOTE If you do not set a location, the radio will use the default setting “CO:All” for all counties.

WR602_EN 8 27/6/07, 12:58 PM