Oricom C1000 1.8 GHz owner manual Programming

Programming			Programming
You can program the ringer melody, dialing mode, Recall duration, user phone			Ringer Melody
number, network service number, and service centre number. You can also
reset all settings back to the factory defaults.				• Press and hold PROGRAM key
Start Programming				during Standby.
		• Press and hold PROGRAM key		• Press “1” to select ringer melody
		during Standby.		programming.
				(The current melody number shall
		( icon is on.)		be displayed.)
		• At any time, press and hold		• Press PROGRAM key to select
		CLEAR key to return to Standby.		melody programming.
				(The current melody number
				flashes.)
				• Press “1” to “5” keys to select
				melody 1 to melody 5
	Note:			respectively.
	1. In the programming mode selection, pressing and holding CLEAR key
				(The selected melody shall be
	will abort all the changes and return to Standby.			played once.)
	2. Invalid entry during programming shall be ignored with a reject tone.
	3. If there is an incoming call or paging from the base, programming will			• Press PROGRAM key to confirm
	be aborted.
				the selection
				• Press CLEAR key to exit.

Note:- If you have connected this product to an extension on your PBX, you may need to dial a particular number (e.g. “9” or “0”) in order to get dial tone for an outside line. You will need to dial this each time you dial out.

29 30