BASIC OPERATIONS
Standby
• When the phone is not in use, the POWER LED on the base is turned on and the LCD on the POD displays your phone number, if programmed.
Answering Calls
When there is an incoming call, the GREEN LEDs on the base and the POD
blink and the 
icon flashes on the display. The speaker on the POD rings the selected melody.
• Press any key to answer except ‘+’ and
• The call timer and clock icon are displayed. The call timer starts with MM:SS (minute and second).
• The talk time remaining counter and hour glass icon are also displayed. The talk timer starts with HH:MM (hour and minute).
Note:
1. The call timer displays the time elapsed on the current active call.
2. The talk time remaining counter displays the estimated remaining in use time at the current battery level before the batteries become empty. If for any reason the talk time remaining counter displays
3. When POD is being charged during talk mode, no talk timer will be displayed.
13
Making Calls
You can make a call by
•pressing PHONE key and then dialing phone number;
•dialing phone number and then pressing PHONE key;
•redialing the last number you dialed;
•dialing the number in phone book.
Traditional Dialing
The phone line is seized before the phone number is entered. The phone number cannot be edited or verified before dialing.
• Press PHONE key.
(The Phone icon turns on and your phone number turns off.)
• Dial the number. Digits are displayed.
(Pressing * and # shall display “
” and “
” respectively.)
• Call timer and talk time remaining counter icons are displayed a while after the last key press.
• To end the call, press PHONE key.
Note: If more than 18 digits are dialed, only the last 18 digits shall be displayed. The Scroll icon shall turn on.
No limit on the number of digits being dialed out.
14
