Programming
Returning to factory Default Setting
• Press and hold PROGRAM key during Standby.
• Press and hold “9” to return the phone to the factory default settings.
(The display will show “888888888888888888”.)
• Press PROGRAM key to confirm the selection.
• Press CLEAR key to exit.
• Refer to the default value section for all factory settings.
35
Additional Features
Call Recording
• External recording equipment can be connected to the 2.5 mm recording jack on the base unit for call recording.
Out of Range Warning
• During phone mode, the LED’s on the POD flashes RED quickly and the signal icon flashes when it is too far from the base.
• User should move closer to the base so the call will not be terminated.
• When the POD is moved close enough to the base, the LED’s and the signal icon will stop flashing automatically.
Paging
• Press the PAGE button at the base during Standby to locate the POD.
• The POD will ring until any key is pressed or stop after 30 seconds if no keys are pressed.
36