Oricom P80 manual Other Features, PIN code, Reset, Key lock

PIN code

A PIN is required for registration and deregistration. The ex-factory PIN is 0000 but you can change this code.

1.Press PROG during standby follow by the 8 key.

2.Enter the current PIN and press OK .

3.Enter the new PIN. It can contain from 0 up to 8 digits. Press OK .

4.Repeat the new PIN and press OK to confirm the new code. You will hear a confirmation tone if it is successful, or a reject tone if the same PIN is not entered.

Reset

If you reset the phone, all the settings will return to the factory default settings.

1.Press PROG during standby. Then press and hold DEL until RESET is displayed.

2.Press OK to confirm the action.

You cannot reset the phone if the handset has lost link with the base. UNAVAIL will be displayed. Re-establish the link and try again.

OTHER FEATURES

Key lock

Press and hold during standby to lock the keypad. appears whenever keypad is locked.

When the keypad is locked, you can still answer an incoming call by

pressing . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again.

To unlock the keypad, press any key and then press OK when you see

PRESS OK.

18