QUICK SET UP
Make sure your base is:
•Located within reach of a mains power socket and telephone socket.
•At least 1 metre away from other electrical appliances, to avoid interference.
•Not located in humid or damp conditions, e.g. in a bathroom.
1 Connect the base power lead and the telephone line cord to the back of the base. Plug the power adaptor into the mains wall socket.
2 For
3 On each handset: Slide the battery cover off and insert the batteries supplied following the markings shown inside the battery compartment, then slide the cover back on until it clicks into place.
4 Place the handsets in the base/charger handset cradle andmecharge for 15 hours before use.
5 Plug the telephone line cord into the wall socket.
Attaching the belt clip
With the back of the handset facing you, align the belt clip with the two slots on the side of the handset and push securely into place.
Your Oricom Touch TAM phone is now ready for use.
ATTENTION
Congratulations on your purchase of the Oricom Touch Phone with its high tech touch sensitive keypad. The touch panel is much more sensitive than a normal phone keypad and provides very fast and responsive keying - however like most new technology it takes a little getting used to.
To get the best use out of your Touch Phone
•Pick it up from the rear and cradle it in your hand.
•During use, avoid touching the keypad area unnecessarily to prevent accidental triggering of the keypad.
•The keypad will automatically disable when you hold the receiver to your ear. The idea being, to reduce the risk of accidental keypad presses while the phone is held against the side of your face.
DO YOU HAVE BROADBAND?
If you do you must connect a
IMPORTANT NOTE: Ensure all phone sockets in use have their own
Touch Phone
Telephone socket
