Orion 10018 XT8i B. Seeing and Transparency, C. Cooling the Telescope, Eyepiece Selection

B. Seeing and Transparency

Atmospheric conditions play a huge part in quality of view- ing. Light from stars and other celestial objects must travel through miles of Earth’s atmosphere to reach our eyes. The air in the atmosphere will refract and bend the light. Atmo- spheric turbulence will worsen the effects of refraction, which can cause the image you see in your telescope to be unsta- ble. The steadiness of the atmosphere is called “seeing.”

In conditions of good “seeing,” star twinkling is minimal and objects appear steady in the eyepiece. Seeing is best over- head, worst at the horizon. Also, seeing generally gets bet- ter later in the evening as much of the heat absorbed by the Earth during the day has radiated off into space. In condi-

4.9
2.4	1.7

1.9

1.9

3.4 2.4

2.5

tions of bad seeing, stars will twinkle and objects will appear unsteady and blurry in the telescope.

“Transparency” is the clarity of the atmosphere, which can be adversely affected by the presence of moisture, smoke, and dust. All tend to scatter light, which reduces an object’s brightness. Good transparency is desirable for astronomical observing, especially for viewing faint objects.

One good measure of transparency is by how many stars you can see with your unaided eyes. If you cannot see stars of magnitude 3.5 or dimmer then transparency is poor. Magni- tude is a measure of how bright a star is. The brighter a star, the lower its magnitude. A good star to remember for this is Megrez (magnitude 3.4), which is the star in the Big Dipper that connects the handle to the “dipper.” If you cannot see Megrez, then you have fog, haze, clouds, smog, light pollu- tion or other conditions that are hindering your viewing (see Figure 25).

C. Cooling the Telescope

All optical instruments need time to reach “thermal equilib- rium” to achieve maximum stability of the lenses and mir- rors, which is essential for peak performance. Images will be unstable if the optics are not in equilibrium with the outdoor temperature. When moved from a warm indoor location out- side to cooler air (or vice-versa), a telescope needs time to cool to the outdoor temperature. The bigger the instrument and the larger the temperature change, the more time will be needed.

Allow at least 30 minutes for your SkyQuest IntelliScope to equilibrate. If the temperature difference between indoors and outdoors is more than 40°, allow an hour or more. In the win- ter, storing the telescope outdoors in a shed or garage greatly reduces the amount of time needed for the optics to stabilize. It also is a good idea to keep the scope covered until the Sun sets so the tube does not heat greatly above the temperature of the outside air.

SkyQuest XT8i, XT10i and XT12i models are designed to accept an optional Orion Cooling Accelerator Fan. When attached to the rear cell of the telescope, the fan hastens the equilibration of the primary mirror to ambient temperature.

D. Let Your Eyes Dark-Adapt

Do not expect to go from a lighted house into the darkness of the outdoors at night and immediately see faint nebulas,

Figure 25. Megrez connects the Big Dipper’s handle to its “pan”. It is a good guide to judging the “seeing” conditions. If you cannot see Megrez (a 3.4-magnitude star) then seeing is poor.

galaxies, and star clusters — or even very many stars, for that matter. Your eyes take about 30 minutes to reach per- haps 80% of their full dark-adapted sensitivity. Many observ- ers notice improvements after several hours of total darkness. As your eyes become dark-adapted, more stars will glimmer into view and you will be able to see fainter details in objects you view in your telescope. Exposing your eyes to very bright daylight for extended periods of time can adversely affect your night vision for days. So give yourself at least a little while to get used to the dark before you begin observing.

To see what you are doing in the darkness, use a red-filtered flashlight rather than a white light. Red light does not spoil your eyes’ dark adaptation like white light does. A flashlight with a red LED light is ideal, or you can cover the front of a regular incandescent flashlight with red cellophane or paper. Dim light is preferable to bright light. Beware, too, that nearby porch and streetlights and automobile headlights will spoil your night vision.

Eyepiece Selection

By using eyepieces of different focal lengths, it is possible to attain many different magnifications with your telescope. The telescope comes with two high-quality Sirius Plössl eye- pieces: a 25mm focal length, and a 10mm focal length, which provides higher magnification. Other eyepieces can be used to achieve higher or lower powers. It is quite common for an observer to own five or more eyepieces to access a wide range of magnifications. This allows the observer to choose the best eyepiece to use depending on the object being viewed and the sky conditions. At least to begin with, the two supplied eyepieces will suffice nicely.

Whatever you choose to view, always start by inserting your lowest-power (longest focal length) eyepiece to locate and center the object. Low magnification yields a wide field of view, which shows a larger area of sky in the eyepiece. This makes acquiring and centering an object much easier. If you try to find and center objects with high power (narrow field of view), it’s like trying to find a needle in a haystack!

Once you’ve centered the object in the eyepiece, you can switch to higher magnification (shorter focal length eyepiece),

18