NICAM STEREO RECORDING AND PLAYBACK/RECEPTION DISTURBANCE
RECORDING
This unit is capable of recording sound in
Press TV/VCR to select TV/VCR mode. Then press MENU.
Press ▲ or ▼ to select the TV SETUP mode, then press ENTER.
TIMER REC SET
AUTO REPEAT OFF
CHANNEL SETUP
TV SETUP
SYSTEM SETUP
SELECT : 
ENTER : ENTER
EXIT : MENU
Press ▲ or ▼ to select the NICAM mode. Then press 
to select [OFF].
TV SETUP
ON/OFF TIMER SET
PICTURE
NICAM[OFF]
SELECT :
/
ENTER : ENTER
EXIT : MENU
Press MENU to return to normal TV screen.
SELECTING STEREO OR BILINGUAL SOUND FOR A
Press AUDIO to select stereo/mono or bilingual playback. See the table below for more information.
Stereo | Bilingual |
| Stereo | Bilingual | ||
(for 4 sec.) | programme | programme |
| (for 4 sec.) | programme | programme |
|
|
|
|
|
|
|
| Stereo | Main sound |
|
| Right channel | Sub (MONO |
|
| from L CH |
|
| signal output | B) sound |
|
| speaker, sub |
|
| from both | heard from |
| sound from R |
| R CH | loudspeakers | both | |
|
| CH speaker. |
|
|
| speakers. |
|
|
|
|
|
|
|
| Left channel | Main (MONO |
|
| Mono | Main (MONO |
| signal output | A) sound |
|
|
| A) sound |
| from both | heard from |
|
|
| heard from |
L CH | loudspeakers | both |
| MONO |
| both |
|
| speakers. |
|
|
| speakers. |
|
|
|
|
|
|
|
It will be displayed for approx. 4 seconds when playing HiFi video cassette tapes.
NOTE: When playing HiFi cassette tapes recorded on another VCR, the sound output may be distorted. This is normal and no indication of a unit malfunction. Try to minimize sound distortions by using TRK/SKIP +/– buttons or change to MONO by pressing of AUDIO.
RECEPTION DISTURBANCE
The most common types of television interference are as follows.
IGNITION
Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from car ignition systems, neon lamps, electrical drills and other electrical appliances.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other object. Changing the direction or position of the antenna may improve the reception.
SNOW
If your receiver is located in the fringe area of a television station where the signal is weak, your picture may be marred by the appearance of small dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE
The interference produces moving ripples or diagonal streaks, and in some cases, causes loss of contrast in the picture.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the unit from the AC power source before cleaning. The finish on the cabinet may be cleaned with mild soap and a soft damp cloth. Take care when cleaning or wiping the plastic parts.
VIDEO HEAD CLOGGING
The video heads record and playback picture and sound on the video tape. In the event that they become dirty you won't be able to do a perfect recording and the playback picture will be extremely snowy with good sound. If this happens have the unit checked by qualified service personnel.
VIDEO HEAD CLEANING
Manual head cleaning is needed if the picture on playback is still unclear although the picture on program is normal. This failure signifies that the head is getting dirty and can occur when playing poor quality or damaged tapes. If the heads require cleaning, use a high quality
NOTES:
•Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
•To help prevent video head cleaning, use only good quality VHS tapes. Discard worn tapes.
31
