Figure 46. Loosen the four captive connecting bolts that attach the side panels to the front panel.
Figure 47. When transporting the disassembled base, lay the side panels so the encoders face upward and don’t stack anything on top of them, to prevent their getting damaged.
2.Loosen the eight captive connecting bolts that attach the side and front panels to the top baseplate (Figure 45). You will have to turn the hand knobs about seven full turns or so to unthread the bolts completely from their receptacles in the top baseplate. Remember, the bolts are captive so they will not come out when they are dis- engaged. When you have loosened each bolt seven full turns or so, lift the side panel/front panel structure off of the top baseplate and set it down next to the baseplate assembly. Do not disassemble the top baseplate from the bottom baseplate.
3.To remove the side panels from the front panel, loosen the four captive connecting bolts that attach the front panel to the side panels (Figure 46). You will have to turn the hand knobs about seven full turns or so to unthread the bolts completely from their receptacles in the side panels.
Now the base has been broken down into four component pieces: the baseplate assembly, the two side panels (with side braces attached), and the front panel. To prevent dam- age to the encoder connecting board and the altitude encoder assembly on the base side panels, we recommend that you not stack anything on those surfaces, and keep them facing up during transport (Figure 47).
When putting the XX14i into a vehicle, common sense pre- vails. It is important that the optical tube sections do not get knocked around; this can cause the optics to become mis- aligned, and could dent the tube. We recommend transporting (and storing) the tube assembly in the optional padded case set for proper protection. The case set includes a two padded cases for the tube sections, plus a pole case that holds the four truss pole assemblies, and a secondary mirror cover. All the cases have carry handles, and one of the padded cases has an accessory pocket for added convenience.
To reassemble the telescope, just reverse the disassembly procedure above.
5. Astronomical Observing
The SkyQuest XX14i IntelliScope Truss Tube Dobsonian pro- vides prodigious capability for observing the many wonders of the heavens, from the major planets to
The IntelliScope Computerized Object Locator
One of the most exciting features of the XX14i is its com- patibility with the IntelliScope Computerized Object Locator. When plugged into the IntelliScope port on the base, the Object Locator enables the user to point the telescope quickly and effortlessly to more than 14,000 astronomical objects with the push of a few buttons. After a simple
The two guide arrows and associated “navigation numbers” tell you in what direction to move the telescope to pinpoint an object’s location. As the telescope approaches the object’s location, the numbers get progressively smaller. When the navigation numbers reach zero, the telescope will be pointed right at the object. You just look into the eyepiece and enjoy the view!
The IntelliScope Computerized Object Locator works by communicating electronically with the pair of
27
