Figure 7. Attaching the base feet to the base.

Figure 8. Secure the front panel to each side panel.

2. Assembly

Now that you have unpacked the boxes and familiarized yourself with all the parts in front of you, it is time to begin ­assembly.

Assembly of the Dobsonian Base

The base need only be assembled once, unless you disas- semble it for long-term storage. The assembly process should take about half an hour. All necessary tools are included in the packages. The two ground baseplates arrive preassem- bled with the motors, optical encoders, and motor housings installed. There is a protective strip of polyethylene foam material between the two base plates (Figure 5). Do not attempt to remove this material; it is glued in place. It is designed to keep dust out of the azimuth motor assembly and gears.

During initial assembly it is suggested to fasten the screws just enough to hold the panels together loosely. When all of the components are assembled, then perform the final tight- ening of each screw one or two turns at a time, alternating from one screw to the next to ensure all are tightened evenly. When tightening screws, tighten them until firm, but be careful not to strip the holes by over-tightening.

1.Turn the baseplate assembly upside-down and gently rest it on the azimuth motor housing. Locate the three starter holes on the perimeter of the bottom baseplate (Figure 6). Insert the screws through the feet and thread them into the predrilled starter holes (Figure 7) with the supplied Phillips screwdriver until tight.

2.Connect the side panels to the front panel (Figure 8). Use the coarse thread socket-head screws for this. There are unthreaded pilot holes (without the metal collar) to align these pieces. Orient the side panels so the oval XTg label is facing outward. Orient the front panel so that the pilot holes for the handle and eyepiece rack face out. The side panel with the motor attached is the left panel. There are six screws total (three for each side) to assem- ble. Start by inserting the screws and turning by hand to ensure they are going in straight. When you begin to meet resistance use the 4mm hex key to complete this

Figure 9. The completed side panel and front panel assembly (XT10g shown).

step. Do not completely tighten the screws yet. Having the boards a little loose will help in aligning the assembly to the top baseplate in step 3. The completed assembly should look like Figure 9.

2a. [For XT12g only] Attach a side brace to the outside sur- face of both the left and right side panels. Each side brace is attached with three base assembly wood screws. Insert the screws through the corresponding pre-drilled holes in the side panel and then thread them into the brace using the included 4mm hex key.

5

Page 5
Image 5
Orion XTG instruction manual Assembly of the Dobsonian Base

XTG specifications

The Orion XTG is at the forefront of technological innovation, designed to meet the demands of modern users seeking both performance and versatility. This state-of-the-art device is particularly appealing to gamers, content creators, and professionals due to its impressive range of features and capabilities.

One of the main aspects of the Orion XTG is its powerful hardware configuration. Integrated with the latest high-performance processors, it ensures smooth and efficient operation, allowing users to tackle even the most demanding tasks without any lag. The device is equipped with advanced graphics capabilities, enabling crisp, high-resolution visuals that elevate the overall experience, whether for gaming or multimedia applications.

Performance is further enhanced by the Orion XTG's ample memory and storage options. With high-speed RAM and spacious SSD solutions, users can enjoy quick loading times and plenty of room for applications, games, and files. The SSD configuration also contributes to energy efficiency and reduced heat generation, making it a sustainable choice for long gaming or working sessions.

The Orion XTG stands out with its cutting-edge cooling technologies. Featuring an advanced cooling system, it utilizes both active and passive cooling mechanisms to maintain optimal temperatures during intense usage. This innovative design minimizes the risk of overheating, thereby prolonging the lifespan of the components and ensuring consistent performance.

Another significant highlight of the Orion XTG is its connectivity options. With multiple USB ports, HDMI, and advanced wireless capabilities, it enables seamless connections to various peripherals, including monitors, external storage devices, and other accessories. This adaptability makes it a perfect fit for a multitude of setups, whether for gaming, graphic design, or general productivity.

User experience is paramount in the Orion XTG's design, featuring a sleek and ergonomic build that enhances usability and comfort. The intuitive interface and customizable settings allow users to tailor their experience, making it easy to switch between tasks or enhance gaming performance based on individual preferences.

In summary, the Orion XTG combines high-performance hardware, advanced cooling solutions, extensive connectivity options, and an ergonomic design. Whether for gaming, content creation, or professional applications, the Orion XTG embodies a perfect blend of functionality and style, catering to a diverse range of users and their specific needs. With its focus on innovation and performance, the Orion XTG is poised to be a standout choice in its category.