Orion Car Audio CO3002, CO6002 owner manual Output Plate

without signal.

3.RCA Inputs - Accepts RCA input from a source unit, preamplifier, or equalizer.

4.Gain Control - Continuously adjusts from 175mV to 8V input to obtain full power output.

5.HPF, FULL, LPF Switch - Selects either Hi-pass crossover, Full range, or Lo-pass cross- over.

6.Lo-Pass Frequency Control - Adjusts the frequency of the crossover.

7.Hi-Pass Frequency Control - Adjusts the frequency of the crossover.

8.Bass Boost Switch - Adjusts bass gain in three steps (0dB, 6dB, & 12dB).

9.Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of turn-on

Output Plate

CO3002

Figure 3

Figura 3

Abbildung 3

Figure 4

Figura 4

Abbildung 4

1 2 3 4 5

CO6002

1 2 2 3 4 5

1.Speaker Connections - accepts up to 12 AWG speaker wire.

2.1 ATC Fuse (CO3002) - 2 ATC Fuses (CO6002) - protects the amplifier from over current situations.

3.Power Connections - accepts up to 4 AWG power cables.

4.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

5.Ground Connection - accepts up to 4 AWG ground cable.

4 © 2008 directed electronics—all rights reserved