INPUT
To use Speaker Level Inputs (common ground head units only), connect RCA plugs to the front or rear speaker leads as shown.
NOTE: It is important to connect an input signal to both RCA input jacks if a stereo amplifier is used, otherwise the connected channel receives full range and the disconnected channel will receive only the harmonics. Use a RCA female to dual male “Y” cord if mono input is used.
CD Receiver
Front Rear
Maxx
Bass®
Power
Amplifiers
Front speakers
LF with Virtual RF SubwooferTM
LRRR
Subwoofer
WARNING: If you are using a source unit with bridged high powered (or "floating ground") speaker outputs, a suitable high to low level adapter must be used. If you are unsure about your head unit see your local Orion dealer.
11
