Panasonic KX-TCD715NLM If You Use International Carrier Services, To Setting Base, then press

TCD715NLM(E)-6Advance1 01.9.17 8:16 PM Page 49

If You Use International Carrier Services

Automatic Route Selection (ARS) is also used for international calls.

After subscribing to a second international carrier service, store the second international carrier code (see page 48). For certain countries, the second international carrier service costs more than the first carrier service. Store “00 (international code)” and those country codes (up to 25 codes) instead of area codes (see page 48).

Ex. Second international carrier code: 1605

Country code: 0033 (The first carrier service is cheaper.)

Dialed number: 0044–55789 → Sent number: 1605–0044–55789

Dialed number: 0033–55789 → Sent number: 0033–55789

•If you stored a phone number with “00” in the speed dialing memory and use a second carrier service which does not require “00”, turn the “00” delete mode ON.

To turn the international code “00” delete mode ON/OFF

Some international carrier services do not require “00” before the country code. In this case, turn the delete mode ON by programming. “00” will be automatically deleted when dialing. The factory preset is OFF.

Ex. Second international carrier code: 1888 (This service does not require “00”.) Delete mode: ON

Dialed number: 0044–55789 → Sent number: 1888–4455789

Chapter 3

1Press .

2Press or until the arrow points

to “Setting Base”, then press .

• “Input Command” is displayed.

3Press 9 .

4Enter the 4-digit base unit PIN (p. 55).

5Press 3 .

•The current mode is displayed.

0: OFF 1: ON

6To select ON, press 1 .

OR

To select OFF, press 0 .

Ex. ON is selected

Input Command 93 09-1

7Press .

•A beep sounds.

•To return to the standby mode, press .

Advanced Operations

49