Panasonic KX-TCD715NLM Canceling a Handset, Canceling a base unit, Press Displayed Beep sounds

TCD715NLM(E)-8Multi 01.9.17 8:22 PM Page 61

Canceling a Handset

Each handset can cancel itself or another handset.

Make sure that the power is ON (p. 11) and the unit is in the standby mode.

1	Press		.			5 Enter the handset number you want to
						cancel.
2	Press		or	until the arrow points		• The selected handset number(s) flash(es).
	to “Setting Base”, then press				.		Ex. The handset No. 5 is selected.
	• “Input Command” is displayed.						Input Command
3	Press	7 .					7	123456
4	Enter the 4-digit base unit PIN (p. 55).
						• If you misdial, press the number(s) again.
	• The current registered handset No. is/are
						6 Press			.
	displayed.
						• A beep sounds.
						• To return to the standby mode, press
						.

Canceling a base unit

If another handset is out of range and/or its power is OFF when “Canceling a Handset”, the previous base unit number will still remain in the canceled handset. Therefore, you need to cancel the base unit registered in the canceled handset.

Chapter 4

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points to “Registration”, then press .

4Press or until the arrow points to “Cancel Base”, then press .

•“Enter H/set PIN” is displayed.

5Enter the 4-digit handset PIN (p. 55).

•Registered base unit(s) is(are) displayed.

6Press or until the arrow points to the base unit(s) you want to cancel, then press .

•“ ” marks the selected base unit.

7Press .

•“Clear ?” is displayed.

8Press or to select “YES” , then

press .

•A beep sounds and “CLEARED” is displayed.

•To return to the standby mode, press

.

Multi-Unit User Operations

61