Selecting specified handsets | Panasonic KX-TCD715NLM specification

TCD715NLM(E)-8Multi 01.9.17 8:22 PM Page 62

For Optional Multi-Unit Users

Bell Selection

There are three choices for bell selection.

When a call is being received:

—all handsets ring. “All handsets”

—the selected handset(s) ring(s). “Specified handset(s)”

—the selected handset rings first, then if it does not answer, all other handsets will ring. “First

handset”

The factory preset is “All handsets”. To change the bell selection, program as follows.

Make sure that the power is ON (p. 11) and the unit is in the standby mode.

Selecting specified handset(s)

You can choose which handset(s) you want to ring.

1Press .

2Press or until the arrow points to “Setting Base”, then press .

•“Input Command” is displayed.

3Press 1 .

4Enter the 4-digit base unit PIN (p. 55).

•The current setting is displayed.

1: All handsets

2: Specified handset(s)

3: First handset

5Press 2 .

•The current registered handset number(s) is/are displayed.

Input Command 1 2-123456

6Enter the handset number(s) you want to ring.

•The selected handset number(s) flash(es).

•If you misdial, press the number(s) again.

7Press .

•A beep sounds.

•To return to the standby mode, press

.

262

Image 62

Panasonic KX-TCD715NLM operating instructions For Optional Multi-Unit Users Bell Selection, Selecting specified handsets

Contents

Operating Instructions Charge the batteries for about 15 hours before initial use For your future reference Accessories includedBefore Initial Use AC Adaptor p Base Unit Location Battery ChargeFor Best Performance Operating range Contents Multi-Unit User Operations Location of Controls Base unit Handset Characters DisplayIcons Display backlight Settings Connections You can check the present battery strength on the display Settings Installing the Batteries in the HandsetBattery strength Recharge To turn the power OFF, press and hold until a beep sounds Turning the Power onBattery information Operation Function menu Summary of Programmable FunctionsPress To set the handset programming p Command menu Summary of Programmable Functions Handset settingsStandby mode Function menu While programming Handset settings menu Selecting the Display Language Programmable SettingsSelecting the Auto Talk Feature Press or to select the desired language Setting date Setting the Date and TimeSetting time Press Twice Press or to select Setting Base then Volume level Programmable Settings Selecting the Handset Ringer VolumeSelecting the Base Unit Ringer Volume To dial after confirming the entered number Making CallsWith the Handset To redial the last number dialed To redial using the redial listMaking Calls Phonebook, from step To clear a number in the redial memory To store an entered number in the phonebookTo store a redial number in the phonebook Dialing buttons, or To redial the last number dialed on the base unit To adjust the speaker volume 8 levelsMaking Calls With the Base Unit Digital Speakerphone Hands-Free Digital Speakerphone If the handset is off the base unit Answering CallsWith the Base Unit Auto talk Private category feature Caller ID ServiceHow caller information is displayed when a call is received Checking the number of new calls To exit the list, press Using the Caller ListViewing the Caller List What means Displayed phone number is dialed automatically Using the Caller List Calling Back from the Caller ListEditing the Caller’s Phone Number To call back, press or To store the number in the phonebook Enter the name, up to 16 characters p Press Press to return to the standby modeStoring the Caller List Information in the Phonebook To clear all entries in the Caller List Using the Caller List Clearing the Caller ListTo clear a specific entry from the Caller List Press or until the arrow points to Clear Using the Phonebook Eva Sch tz Enter Phone No Enter New Phonebook Memory Avail Enter NameDialing buttons, , or C While Save is at the arrow Press To enter names selecting characters If you make a mistake while entering a name Greek AÄÅ Extended Using the PhonebookCharacter mode table SŚŠ Extended Russian Setting the ringer type of the private category Using the Phonebook Using the Private Category FeatureSetting the backlight color of the private category Press or to select the backlight color To search for a name by initial Finding Items in the PhonebookDialing from the Phonebook Press or until the desired name is displayed Using the Phonebook Editing an Item in the Phonebook Clearing an Item from the Phonebook Dialing a stored number Hot Key DialStoring phonebook items as hot key dials Clearing an item in the hot key dial To copy all the item in the phonebook Using the Phonebook Phonebook CopyTo copy the specified item in the phonebook Paging the handset from the base unit Handset locator IntercomPaging the base unit from the handset From the base unit to the handset Intercom Trasferring a Call Using the IntercomFrom the handset to the base unit For Analog PBX Line/Long Distance Service Users Special FeaturesHow to Use the Pause Feature Setting the pause timing Selecting the flash timing Special Features Setting the Key LockUsing the Recall Feature Press Enter the 4-digit base unit PIN p Direct Call Setting the Direct Call Number and ModeTo turn OFF/ON the direct call mode Dialing the Stored Number To turn OFF the call prohibition mode Call Prohibition Call Restriction Follow steps 1 to 6 on page 45. In step To cancel the call restriction numbersWhen you dial a restricted number Call restriction number is cleared Automatic Route Selection Mode, press , and try again To store the carrier code To store the area codes To Setting Base, then press If You Use International Carrier ServicesTo turn the international code 00 delete mode ON/OFF Current mode is displayed OFF During a conversation, the display will be as follows Selecting the Talk Mode DisplayTalk Display Talk Time Phone No To stop the time alarm Setting the Time AlarmTo turn off the time alarm Other Programmable Settings Setting the Handset Ringer Type Setting the Battery Low Alarm Setting the Call Waiting ToneSetting the Range Warning Alarm Press or to select Setting Base then Ringer pattern Selecting the Display Backlight Color Other Programmable Settings Setting the Key TonesFactory preset is green On the handset Press On the base unit Setting the PINOn the handset Enter the new 4-digit PIN Twice On the handset Clearing the Settings in MemoryFunction Initial setting Function Bell selection All handsets Mode Operating More than One Base Unit For Optional Multi-Unit UsersOperating More than One Handset Is engaged in an external call Handset Press Base unit where handset is to be RegisteredRegistering Optional Handsets in the Base Unit Available base unit numbers are displayed Select Base H Auto Base1 Automatic base unit access AutoSpecified base unit access Press or to select the desired base unit Press Displayed Beep sounds Canceling a HandsetCanceling a base unit Current registered handset numbers is/are displayed For Optional Multi-Unit Users Bell SelectionSelecting specified handsets Enter the handset numbers you want to ring Follow steps 1 to 4 on Press Selecting first handsetSelecting all handsets Enter the handset number you want to ring Base New Calls 25.04 While Standby Display is at the arrow, pressNew Calls 25.04 Paging all the handsets from the base unit All paging Paging/IntercomIntercom between the Handsets and the Base Unit Paging a handset from the base unit Individual paging Paging/Intercom Intercom between Handsets Transferring a call without the intercom Transferring a call using the intercomTransferring a Call from One Handset to Another Paging/Intercom Conference Connecting the headset to the handset Using the Belt ClipUsing an optional Headset To adjust the headset receiver volume HIGH, Medium or LOW Current battery type is at the arrow Selecting the battery typeBattery replacement Replacing the Batteries Useful Information Chapter Wall Template To charge the handset batteryWall Mounting Connect the AC adaptor Install the batteries and close the battery cover Option Covers Problem Remedy Before Requesting Help Level p Base unit does not ring As the setting the handset volumeHandset does not ring LOW p Before Requesting Help Safety Instructions Term Definitions TCD715NLME-9Useful 01.9.17 844 PM PQQX12957ZA KU0901ST0 Verkoopafdeling Service-afdelingPostbus 16280, 2500 BG DEN Haag