Panasonic KX-TCD715NLM Turning the Power on, Battery information, Operation, Press and hold

TCD715NLM(E)-1Preparation1 01.9.17 8:07 PM Page 11

Battery information

After your Panasonic batteries are fully charged:

Operation	Ni-MH battery operating time (included)	Ni-Cd battery operating time (optional)*
While in use (Talk)	Up to about 20 hours	Up to about 12 hours(based on 800mA per hour)
While not in use (Standby)	Up to about 200 hours	Up to about 100 hours

•Battery Operating time may be shortened depending on usage conditions, such as:

—when viewing the Caller ID Caller List or phonebook,

—when talking in speakerphone mode, and

—ambient temperature.

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the batteries may not charge properly.

•If the batteries are fully charged, you do not have to place the handset on the base unit until

“ ” flashes. This will maximize the battery life.

•The batteries cannot be overcharged.

*Nickel cadmium (Ni-Cd) rechargeable batteries (AA size) are available.

When you replace the batteries, you must program the battery type selection (see page 70).

Chapter 1 Preparation

Turning the Power ON

Press and hold .

•After all the possible configurations briefly appear, the display will change to the following. Then the handset is in the standby mode.

#Base 1

$10 New Calls % 12.05 13:58

#The current connected base unit number: You can choose whether to display the base unit number, handset number or no display in the standby mode by programming (p. 64).

$The number of new Caller ID calls received

(p. 24)

%The current date and time:

After you set the date and time, the current date/time will be displayed (p. 17).

To turn the power OFF, press and hold until a beep sounds.

•The display will go blank.

•The handset will not ring.

11