Panasonic KX-TCD715NLM operating instructions Call Restriction

TCD715NLM(E)-6Advance1 01.9.17 8:16 PM Page 45

Call Restriction

You can restrict desired handset(s)/base unit from dialing selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialed out. For example, if “00” is assigned as the call restriction number, international calls cannot be made.

For selected handset(s)/base unit, you can assign up to 6 call restriction numbers (up to 8 digits). Set the call restricted handset(s)/base unit and the restriction number(s) by programming. The factory preset is OFF.

Make sure that the power is ON (p. 11) and the unit is in the standby mode.

1	Press			.			7 Enter a call restriction number, up to 8
2	Press			or	until the arrow points			digits.
							• If you misdial, press C . The digits are
	to “Setting Base”, then press					.		erased from the right. To erase all digits,
	• “Input Command” is displayed.							press and hold C .
3	Press		6 .				8 Press			.
4	Enter the 4-digit base unit PIN (p. 55).						• A beep sounds.
							• “2” is displayed. To continue entering a
	• The current registered handset
								number, enter the next number, then press
		number(s)/base unit is/are displayed.					.
	• The base unit number is displayed as “0”.
								Input Command
		Input			Command			6	2-
		6	0123456
5							9 Press				.
	Enter the handset number(s)/base unit
							• To return to the standby mode, press
	which you want to restrict.
									.
	• The selected handset number(s)/base unit
		flash(es).
	• If you misdial, press the number(s) again.

6Press .

•“1” is displayed.

Input Command 6 1-

Chapter 3 Advanced Operations

45