Setting time
1Press .
2Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3Press .
•If already set, the current setting is
displayed.
4Enter the current time (24 hour time)
using a 4–digit number.
5Press .
•Abeep sounds.
•To return to the standby mode, press
.
17
Chapter 1 Preparation
Setting the Date and TimeAfter setting the date and time, the current date and time will be displayed on the handset in the
standby mode. You can set 24-hour clock by programming.
Make sure that the power is ON (p. 11) and the unit is in the standby mode.
Setting date
1Press .
2Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3Press TWICE.
•If already set, the current setting is
displayed.
4Enter the current date (day, month, year)
using a 6-digit number.
5Press .
•Abeep sounds.
•To return to the standby mode, press
.
Input Command
__–__
Input Command
09–30
Ex. To set 9:30, enter “0930” .
Input Command
__–__–__
Input Command
05–08–01
Ex. To set 5. August, 2001, enter “050801”.
If a power failuer occurs, the adjusted date
/time will be erased. Readjust the date/time.
TCD715NLM(E)-2Preparation2 01.9.17 8:10 PM Page 17