Panasonic KX-TCD715NLM operating instructions Setting the PIN, On the handset, On the base unit

TCD715NLM(E)-7Advance2* 01.9.17 8:19 PM Page 55

Setting the PIN

You can program a 4-digit handset/base unit PIN (Personal Identification Number). The factory preset is 0000. Changing the PIN may prevent the unauthorized use of your unit by another person.

Make sure that the power is ON (p. 11) and the unit is in the standby mode.

Once you have programmed the PIN, you cannot confirm it. We recommend you write down the PIN. If you do forget it, please consult your nearest Panasonic Service Center.

On the handset

1Press .

2Press or until the arrow points

to “Setting Handset”, then press .

3Press or until the arrow points to “Other Option”, then press .

4Press or until the arrow points to

“Change Hset PIN”, then press .

Enter Old PIN 1234567890 :----

5Enter the current 4-digit handset PIN.

•The factory preset is 0000.

6Enter the new 4-digit PIN TWICE.

• If you misdial, press C . Digits are erased from the right. To erase all digits, press and

hold C .
1st
	Enter	New	PIN
	1234567890		:----
2nd	Verify	New	PIN
	1234567890		:----

•A beep sounds.

•To return to the standby mode, press

.

•If 5 beeps sound in step 5, the entered PIN is incorrect. Enter the correct PIN.

On the base unit

1Press .

2Press or until the arrow points to “Setting Base”, then press .

•“Input Command” is displayed.

3Press 5 .

Input Command

5____

4Enter the current 4-digit base unit PIN.

•The factory preset is 0000.

Input Command 5 ____ ____

5Enter the new 4-digit PIN TWICE.

•A beep sounds.

•To return to the standby mode, press

.

•If 5 beeps sound in step 4, the entered PIN is incorrect. Enter the correct PIN.

Chapter 3 Advanced Operations

55