Chapter 2 Basic Operations

00-00-00

To dial after confirming the
entered number
1Enter a phone number.
The entered number is displayed.
If you misdial, press . Digits are erased
from the right.
To cancel, press and hold or press
.
2Press .
” is displayed.
After a few seconds, the display will start
showing the length of the call.
3To hang up, press or place the
handset on the base unit.
The handset will return to the standby
mode.
C
C
Making Calls
1Press .
” is displayed.
2Dial a phone number.
The dialed number is displayed.
After a few seconds, the display will show
the length of the call.
If “ ” flashes and an alarm tone sounds
after pressing or , move closer to
the base unit. Then try again.
You can choose whether to display either the
length of the call, call charge or phone number
in the talk mode by programming (p. 50).
3To hang up, press or place the
handset on the base unit.
The handset will return to the standby
mode.

12345678

To have a hands-free phone
conversation (Using Digital
Speakerphone)
1Press .
The button lights.
2Dial a phone number.
The dialed number is displayed.
After a few seconds, the display will show
the length of the call.
3When the other party answers, talk into
the microphone.
4To hang up, press or place the
handset on the base unit.
Hands-free Digital Speakerphone
For best performance, please note the
following:
Talk alternately with the caller in a quiet
room.
If the other party has difficulty hearing you,
press to decrease the speaker
volume.
If the other party’s voice from the speaker
cuts in/out during a conversation, press
to decrease the speaker volume.
While talking, you can switch to the hands-
free phone conversation by pressing
. To switch back to the receiver,
press or .

With the Handset

Make sure that the power is ON (p. 11).
19
TCD715NLM(E)-3Basic1* 01.9.17 8:11 PM Page 19