Panasonic KX-TCD715NLM Special Features, How to Use the Pause Feature, Setting the pause timing

TCD715NLM(E)-5Basic3* 01.9.17 8:16 PM Page 41

Special Features

How to Use the Pause Feature

(For Analog PBX Line/Long Distance Service Users)

We recommend you press if a pause is required for dialing with a PBX or to access a long distance service.

Ex. Line access number 9 (PBX)

9 ➡ ➡ P h o n e n u m b e r

•Pressing creates a pause.

This prevents misdialing when you redial or dial a stored number.

•Pressing more than once increases the length of the pause between numbers.

Setting the pause timing

You can set the pause timing to 3 seconds or 5 seconds, depending on your PBX requirements. The factory preset is 3 seconds.

Make sure that the power is ON (p. 11) and the unit is in the standby mode.

Chapter

1Press .

2Press or until the arrow points to “Setting Base”, then press .

•“Input Command” is displayed.

3Press 3 .

4Enter the 4-digit base unit PIN (p. 55).

•The factory preset is 0000.

5Press 3 .

•The current timing is displayed.

1: 3 seconds 2: 5 seconds

Ex. 3 second is selected.

Input Command 33 1

6To select 5 seconds, press 2 .

OR

To select 3 seconds, press 1 .

7Press .

•A beep sounds.

•To return to the standby mode, press

.

•If 5 beeps sound in step 4, the entered PIN is incorrect. Enter the correct PIN.

2 Basic Operation

41