Oster Oster Fusion Blenders The Ultimate Chopping and Blending Solution Using Your Product

Using Your Product

Before you use the product for the first time, separate the lid, jar lid food chute and blade from the jar. Wash in warm, soapy water, or top rack in the dishwasher.

Rinse and dry well.

Assembly (Glass Jar Models)

1.Install the sealing ring over the multi-functional blade.

Blade is sharp. Handle with care.

2.Turn the jar upside down so the small opening is at the top.

3.Turn the multi-functional blade with sealing ring upside down and place into the bottom of the jar.

4. Position the open end of the threaded jar bottom over the jar and sealing ring. Turn clockwise to tighten.

Be sure the threaded jar bottom is locked securely to the jar before using.

5. Slide the jar onto the base.

6. Plug the power cord into a standard household 120/127- volt, 60 hz. AC outlet. You are now ready to start.

On	Stop
Off

Using the Pre-Programmed Settings

1.Press the ON/OFF power button to turn the product on. The power light will to blink, meaning the product is

active and ready to use. The light will stay on when the motor is running.

2. Choose a recipe from the recipe section of this manual or use one of your own.

3. Put the ingredients into the jar.

4.Secure the lid and jar lid food chute.

5.Press one of the two Pre-Programmed Setting

buttons appropriate for your recipe. “Frozen Drinks & Shakes” Button “Food Chop” Button

6. To change your selection, press Stop followed by another Pre-Programmed Setting button (“Frozen Drinks & Shakes” or “Food Chop”)

7.Once the program is finished the product automatically stops. Please note: You may press the “Stop” button to cancel the program at any time. The blinking red light indicates that the blender is ready.

8.Press the ON/OFF power button to turn the product off.

This product is pre-programmed to turn off automatically if not used for a period of several minutes. All lights will turn off when the unit automatically powers down.

7