MATE - SYSTEM CONTROLLER AND DISPLAY
‘SOFT’ KEYS
The four buttons under the LCD are referred to as the ‘soft’ keys. Their operation is dependent on what their label says. The label is the word on the bottom line of the LCD directly above the button.
Soft keys used to navigate the menus are commonly labeled <UP>, <DOWN>, <NEXT>, <BACK>, or <TOP>.
Soft keys that change settings are labeled either with the change they will make, such as : <OFF>, <AUTO>, and <ON>, or if there are more than a couple values that the setting can be changed to, <INC> and <DEC> are used to mean increase and decrease, respectively.
SETUP/FX/INPUT | |
ac transfer | GEN |
control |
|
DOWN GRID GEN | PORT |
In this example, pressing <DOWN> will take you to the next set point screen in the SETUP/FX/INPUT menu.
TOP SETUP MAIN
In this example, pressing <TOP> will take you to the first screen in the SETUP/FX/INPUT menu. <SETUP> will return you to the SETUP/FX screen, and <MAIN> will take you back to the Main screen.
SETUP/FX/INPUT | |
ac transfer | GEN |
control |
|
DOWN GRID GEN | PORT |
|
|
In this example, pressing <GRID> will change the FX AC transfer control to GRID mode. Conversely, pressing <GEN> will change the FX AC transfer control to GEN mode.
SETUP/FX/INPUT | ||
ac1/grid | 24.0 aac | |
limit |
|
|
DOWN INC | DEC | PORT |
|
|
|
In this example, pressing <INC> or <DEC> will change the numerical value of the ac1/grid limit setting.
aux output CoolFan function
DOWN INC DEC PORT
In this example, there are multiple operating modes for the aux output function. Pressing <INC> or <DEC> will cycle through the available modes.
Copyright 2003 OutBack Power Systems, Inc. | FX & VFX “E” Series Inverter/Charger System | Installation & Programming Manual |
19009 62nd Ave NE, Arlington WA 98223 USA |
|
|
Tel 360 435 6030 Fax 360 435 6019 | Rev 7.1 06/08/06 |
Page 31
