END of Advanced Menu System, Cal | Outback Power Systems VFX3048E

MATE SCREENS

CALIBRATION MENU

The CAL (calibration) section is used in the factory or field to make fine adjustments in the operation of the FX. It is particularly useful when multiple FX’s are connected together in the different stacking configurations to maximize the performance of the FX’s.

In most cases, the user will not need to adjust these settings from the factory default values.

ADV/FX/PAGE1--------

choose category:

ADV INV CHGR PG2

↓

ADV/FX/PAGE2--------

choose category:

PG1 GRID GEN PG3

↓

ADV/FX/PAGE3--------

choose category:

PG2	AUX	STACK	PG4
			↓
ADV/FX/PAGE4--------
choose category:
PG3	SELL	CAL	MAIN

		↓

ADV/FX/CALIBRATE-P00
vac input		230 vac
adjustment
DOWN	INC	DEC	PORT

↓

ADV/FX/CALIBRATE-P00

vac output	230 vac
adjustment
DOWN INC	DEC PORT

↓

ADV/FX/CALIBRATE-P00 battery vdc 12.8 vdc adjustment

DOWN INC DEC PORT

↓

ADV/FX/CALIBRATION-- calibration setup completed

TOP ADV MAIN

Once the password has been correctly entered, the ADV - CHOOSE CATEGORY: screen is displayed. Selecting <PG2> shows a second screen of categories.

Selecting <PG3> shows a third screen of categories.

Selecting <PG4> shows a fourth screen of categories.

Selecting <CAL> allows calibration of the AC input, AC output, and battery voltage set points.

The VAC INPUT ADJUSTMENT allows calibration of the AC input voltage. If the AC source is measured and is different than the value read from the MATE, the user can adjust the reading to match the measured value. This value can be raised by pressing the INC button. Conversely, this value can be lowered by pressing the DEC button. The value can be raised or lowered 4 vac.

The VAC OUTPUT ADJUSTMENT allows calibration of the AC output voltage. If the AC output is measured and is different than the value read from the MATE, the user can adjust the reading to match the measured value. This value can be raised up to 4 vac by pressing the INC button and lowered up to 4 vac by pressing the DEC button. NOTE: Only affects MATE's voltage display - See page 47 [ADJ. OUTPUT VOLTAGE] for actual adjustment of inverter VAC output.

The BATTERY VDC ADJUSTMENT allows calibration of the battery voltage. If the battery voltage is measured and is different than the value read from the MATE, the user can adjust the reading to match the measured value. This value can be raised by pressing the INC button. Conversely, this value can be lowered by pressing the DEC button. The value can be raised or lowered 0.2 vdc.

Selecting TOP returns the user to the top of the ADV/FX/CALIBRATION menu section. Selecting ADV returns you to the advanced screen to allow selection of another product connected to the MATE. Selecting MAIN returns the display to the MAIN screen.