RATINGS
AC INPUT FREQUENCY RANGE:
This is the AC input source’s frequency range that the FX will accept and stay connected. If the AC input source is out of this range, the FX will not connect or stay connected.
All “Export” FXs | 45 - 55 Hz |
MAXIMUM AC OUTPUT CURRENT:
This is the amount of “Surge” current that the FX will supply. This amount of surge can only be supplied for a split second. After this split second the FX lowers this surge limit. Depending on the size of the surge, the FX can be overloaded for a minimum time of 5 seconds to a maximum time of 30 minutes. When passing an AC source through the FX via the AC transfer switch, the maximum AC output fault current will be determined by the AC source.
All “Export” FXs | 25 AAC per FX for 1 millisecond |
MAXIMUM CONTINUOUS OUTPUT POWER:
Each FX has a maximum continuous output power it can deliver. This maximum continuous output power is hidden in the model number of the FX. For instance, an FX2012MT has a maximum continuous output power of 2000VA
FX2012ET | 2000 VA (VA = |
FX2024ET | 2000 VA |
FX2348ET | 2300 VA |
VFX2612E | 2600 VA |
VFX3024E | 3000 VA |
VFX3048E | 3000 VA |
MAXIMUM OVERCURRENT PROTECTION AMPACITY:
This rating specifies the proper overcurrent protection ampacity. OBDC are panel mount circuit breakers. FX’s used in home installations should use properly sized DC circuit breakers. DC breakers include both overcurrent protection and disconnect capability.
MODEL | AMPACITY | DC BREAKER |
FX2012ET | 250 amps | |
FX2024ET | 175 amps | |
FX2348ET | 100 amps | |
VFX2612E | 250 amps | |
VFX3024E | 250 amps | |
VFX3048E | 175 amps |
Copyright 2003 OutBack Power Systems, Inc. | FX & VFX “E” Series Inverter/Charger System | Installation & Programming Manual |
19009 62nd Ave NE, Arlington WA 98223 USA |
|
|
Tel 360 435 6030 Fax 360 435 6019 | Rev 7.1 06/08/06 |
Page 9
