Sonos ZP100 Rear Panel Connectors, Right speaker, terminals, Ethernet, switch, Voltage select

12						Sonos ZonePlayer ZP100 Setup Guide
ZP100 Rear Panel Connectors
		Right speaker		Left speaker
			terminals		terminals
Ethernet
switch
connectors							Voltage select
							115V/230V
							AC power (Mains)
							input
Subwoofer output
	Analog audio outputs					Analog audio inputs

Ethernet switch connectors (4)	Use Category 5 Ethernet cable to connect to a router,
	computer, or additional network device such as a
	network-attached storage (NAS) device.
	LED indicators:
	• Green (link connection)
	• Flashing Yellow (network activity)
Right speaker terminals	Use high-quality speaker wire to connect the right
	speaker to the ZonePlayer.
Left speaker terminals	Use high-quality speaker wire to connect the left speaker
	to the ZonePlayer.
Voltage select	115V/230V
	Select the appropriate voltage setting for your country.
AC power (mains) input	Use the supplied power cord to connect to power outlet.
Analog audio out (fixed/variable)	You may use a standard RCA audio cable to connect the
	audio inputs on a separate audio component such as an
	amplifier or your home theater receiver, to the
	ZonePlayer’s analog audio outputs.