Sonos ZP100 setup guide 1-2-3Setup, 1Connect Speakers and Apply Power

4 Sonos ZonePlayer ZP100 Setup Guide

1-2-3 Setup

1Connect Speakers and Apply Power

Note: Be sure to connect the red ( + ) and black ( - ) terminals from each speaker to the corresponding terminals on the ZonePlayer. Mismatching of polarities will result in weak central sound, and a distorted sense of sound direction.

Voltage Switch

Speakers: Power rating should be at least 75W for 8 Ohm speakers and at least 150W for 4 Ohm speakers.

Make sure the voltage switch is set to the proper position (230 V is the European default setting)

•Use your thumb or finger to firmly push the spring-loaded speaker connector post in- ward to reveal the connection hole.

•Insert the stripped end of the speaker wire into the hole, then release. Repeat for the oth- er speaker connections.

Caution: Make sure the voltage switch is set to the proper position for your household before plugging in your ZonePlayer ZP100.

•Attach the power cable and plug in your ZonePlayer.

Proceed to step 2 when the ZonePlayer Status	Mute button (green)
indicator on the ZonePlayer’s front panel flashes	ZonePlayer
white and the Mute button flashes green.	Status Indicator
	(white)