Over And Back PAP2 manual Front Panel, Phone Adapter’s LEDs are located on the front panel

Phone Adapter with 2 Ports for Voice-over-IP

The Front Panel

The Phone Adapter’s LEDs are located on the front panel.

	Figure 2-2: Front Panel
PHONE 1 LED	Blue. The PHONE 1 LED is solidly lit when a telephone or fax machine has a registered
	connection to Vonage through the PHONE 1 port. (The connection is registered if your
	Internet phone service account is active.) It flashes when the phone is being used or an
	incoming call has been detected.
PHONE 2 LED	Blue. The PHONE 2 LED is solidly lit when a telephone or fax machine has a registered
	connection to Vonage through the PHONE 2 port. It flashes when the phone is being used or
	an incoming call has been detected.
ETHERNET LED	Blue. The ETHERNET LED lights up when the Phone Adapter is connected to your network
	through the Ethernet port. It flashes when there is data being sent or received.
Power LED	Blue/Red. The Power LED lights up when the Phone Adapter is powered on and ready. It
	flashes when the Phone Adapter is booting up, undergoing a self-test, or performing a
	firmware upgrade. The LED lights up red when the Phone Adapter has failed its self-test or
	is malfunctioning. Refer to “Appendix A: Troubleshooting” for more information.
4	Chapter 2: Getting to Know the Phone Adapter
	The Front Panel