3.2. Operation
Follow these instructions to operate the Professional Weather Station on a day to day basis.
Selecting the indoor temperature display
In normal mode the "INDOOR" display field shows the indoor temperature and indoor humidity.
-By repeatedly pressing the "IN" key, you can switch between displaying the indoor temperature and the associated dew point value:
→Indoor temperature → Dew point
Selecting the outdoor temperature display
In normal mode the "OUTDOOR" display field shows the outdoor temperature and outdoor humidity of the chosen outdoor sensor.
-By repeatedly pressing the "OUT" key, you can switch between displaying the outdoor temperature and the associated dew point value or the perceived temperature (wind chill):
→Outdoor temperature → Dew point → Wind chill
Selecting the outdoor sensor
The "Sensor" display field shows the outdoor sensor you have just selected, along with its address. Only active sensors (received in the synchronisation phase) are displayed.
The outdoor sensors 1 to 8 (E 9305) and the
- You can select the desired sensor by repeatedly pressing the "SENSOR" key.
Selecting the rainfall display period
-By repeatedly pressing the "RAIN" key, you can switch between the indication for the last hour, the last 24 hours or the total quantity since the last reset or since the batteries were inserted:
→1 h → current 1 h → 24 h → current 24 h → total
Resetting the total rainfall quantity
-Press and hold the "RAIN" key down for about 2 s to reset the total rainfall quantity immediately after the key is released.
15