-Clean residue from the collector funnel, contacts, counter rocker and drain hole at the bottom of the housing.
-Insert the counter rocker back into its bracket. The magnet of the counter rocker must be on the side next to the cable.
-Insert the rainfall sensor into its bracket. It will automatically hold the counter rocker firmly. The cable of the rainfall sensor and the magnet of the rocker arm must be on the same side.
-Then put the collector funnel onto the sensor holder from above and engage it by turning it to the right.
-Push the housing back in again from underneath and engage it in the sensor holder by turning it to the right until it slots in. Make sure that the drain holes of the housing and sensor holder coincide (drain hole of the housing points to the outside).
The following pictures illustrate the disassembly/assembly process
Rocker correctly installed
To detach: Turn to the left, remove housing from underneath, remove collection funnel from above
To attach:
Attach,
turn to the right
Rainfall sensor correctly installed
Slot for collection funnel
Housing correctly engaged at bottom (collec- tion funnel removed for illustrative purposes)
Drain hole
21
